|
|
||
|
About ATI 公司簡介| Support 技術支援| News 最新消息| Contact Us 聯絡我們 |
||
|
Load cell 荷重元| Torque 扭力計| Strain 應變規| Pressure 壓力| Vibration 振動| Temperature 溫度| Datalogger 資料擷取 |
||
|
Wireless Torque 無線傳輸扭力量測| Displacement 位移計| Flow 流量計| Aviation 航太工業| Automotive 汽車動力測試 |
||
Measurements Group 應變計專用儀器
| Strain Indicator 應變計用指示器 | Signal Conditioning Amplifiers 信號放大器 | ||
|
|
|
2100 System Economical Signal Conditioner/Amplifier | |
| 3800 Wide Range Strain Indicator | 2200 System for Severe Environments | ||
| SB10 Switch & Balance Unit | 2300 System High Performance | ||
| The Model P3 Strain Indicator and Recorder is a portable, battery-operated instrument capable of simultaneously accepting four inputs from quarter-, half-, and full-bridge strain-gage circuits, including strain-gage-based transducers. Designed for use in a wide variety of physical test and measurement applications, the P3 functions as bridge amplifier, static strain indicator, and digital data logger. | |||
| Data System 資料擷取設備 | |
|
|
|
|
Depending on their design, digital data
systems can be used for measurement of static, dynamic, or both kinds of
signals. System 6000, with higher sampling rates and digital filters, is
suitable for signals of up to 4 kHz. System 5000, with a 5-Hz low-pass
analog filter and lower sampling rates, can be used for static or
quasi-static signals. System 5000 and System 6000, the Strainsmart 
Data Systems, accept inputs not only from strain gages but also
strain-gage-based transducers, other transducers with high-level signals,
LVDT's, thermocouples, and (for System 6000 only) piezoelectric sensors.
Multi-channel systems used in conjunction with computers include StrainSmart software for data acquisition, reduction, and processing. |
|
| Special Purpose 相關儀器 | |
|
|
3650 Peak-Read Indicator |
| 1550A Strain Indicator Calibrator | |
| V/E-40 Strain Gage Simulator | |
| 1300 Gage Installation Tester | |
